Wireless networks are widely used today. In recent years there has been a considerable improvement in terms of signal quality, speed and stability. However, users often make mistakes that can impair proper operation. Let’s see which are the main ones that could cause Wi-Fi to cut , go slow or even stop working directly.
Common failures affecting Wi-Fi
We can say that Wi-Fi is the main technology we use to connect to the Internet . It is true that we also have equipment connected by cable, such as a computer or television, but the wireless option is becoming increasingly important.
The main reason is that we have more compatible devices . We have many devices of what is known as the Internet of Things and that is part of our day to day. This range of possibilities makes it essential to have to connect without using wiring. But of course, this can also have negative consequences if it is not configured well or we do not make good use of technology.
Misplacing the router or access point
Undoubtedly one of the most common mistakes that we make and that can greatly affect the operation of Wi-Fi is not placing the router correctly . It is common that when hiring the Internet, when acquiring a new device, users place it anywhere, where it least interferes or where it can be most likely to be.
However, this sometimes means that we have the router in an area of the house where we are not going to take advantage of the connection. It could also even be near other electronics that affect quality.
Our advice is to place the router in a central place in the home. Failing that, we can place it in an area where we are going to make the most of the connection. In addition, it must be kept away from other devices and appliances. This must also be applied to the access point, since in many cases the repeaters we place them incorrectly, in dead zones.
Choosing the wrong band
Another issue to take into account and that may be the reason why our Wi-Fi connection is slow, cuts or does not work as we would like, is to be using a band that is not the most appropriate according to the circumstances.
As we know, we can use the 5 GHz and 2.4 GHz bands in modern devices. Basically the first option offers us a higher speed, but it is more unstable and it affects distances more. On the other hand, the second option, which is slower, allows us to connect from a greater distance.
Therefore, we must choose very well which Wi-Fi band we are going to use. Otherwise we would be wasting the available resources and that could be a burden. We would not be getting good speed and we could also have cuts.
When acquiring a new router or even the one we already have, we must configure it properly. For example, you have to see very well which channel to use , see if the power is well managed, etc.
It is therefore advisable to take a good look at the configuration of our device and observe that everything works properly. If we have a bad configuration we can see that our equipment cannot connect with a good speed. We could even have cuts.
Have the network insecure or connect without protection
One more common mistake that can affect Wi-Fi speed is not properly maintaining security . We must always protect the network, with a good password that prevents intruders. In case anyone can access it, it could slow down the connection, in addition to controlling the devices that we have connected. We can have some tips if the Wi-Fi is disconnected.
But we must also take into account the importance of connecting protected to public Wi-Fi networks. They can be used by hackers to steal our data, and we could have stability and quality problems. Our advice is to use a VPN to surf on public Wi-Fi.
Therefore, these are some common mistakes that we make when using Wi-Fi and that could hinder the proper functioning of the equipment. It is important not to make mistakes that can also affect safety when sailing.