Why Ethernet Ports Are Key For 10Gbps Fiber

At first the first ADSL routers that were distributed only had Fast-Ethernet ports. A short time later, the first routers with Wi-Fi also appeared and with the popularization of Internet speeds above 100Mbps, routers began to incorporate Gigabit Ethernet ports, until now these speeds have been very short due to high speeds. from fiber optics to the home. Today we are going to explain why Ethernet ports are essential to squeeze the most out of 10Gbps fiber.

Why Ethernet Ports Are Key For 10Gbps Fiber

Current situation of the Ethernet ports on your router

Nowadays, for a few years now, the maximum speed that you can find in the Ethernet ports in your router is usually 1 Gbps , that is, we have Gigabit Ethernet ports for the LAN. However, this 1 Gbps speed may fall short on some occasions if we transfer files massively within our local network, or if we have speeds higher than 1 Gbps symmetric, and this interface speed will act as a bottleneck.

If we want to take full advantage of fiber connections higher than 1 Gbps in the future, we will need a router with Multigigabit Ethernet ports , generally with 2.5G ports would be enough, however, there are also models of routers that support higher speed such as 10GbE, ideal for the ultra-fast connections of the main operators.

On the other hand, if we want Ethernet ports in your router at speeds of 10GbE, we must mention that the price is still very high, unless the operator provides it completely free of charge. Regardless of that, ISPs or Internet providers will try to stretch Gigabit Ethernet technology to the maximum in their current routers. However, if it is locally, we could achieve that speed with a 10G switch and category 7 cables onwards. So you could have your home network with 10 Gbps to transfer files at high speed.

The great advantage of having Ethernet ports on your router is that, unquestionably, in the vast majority of cases it will be able to provide us with greater bandwidth. That does not take away the main asset of Wi-Fi, which is the mobility it offers us.

Why WiFi Can’t Replace Ethernet

Network cables and Ethernet ports on home routers have a long way to go until they are no longer used, that is provided it does happen at some point. One of its main advantages is the simplicity of its installation . In this case, simply insert the RJ45 connector of your twisted pair cable into one of the Ethernet ports of your router, and then do the same on the equipment you are going to use.

We also find a well-known technology that dominates the market especially in terms of speed. In addition, as it is widely used in our homes and businesses, the boards and wiring used are massively manufactured and we have very competitive prices .

Nor should we forget that if we connect by network cable we will obtain greater security . In this case we do not have to worry about the vulnerabilities that Wi-Fi has and depending on the encryption used it can be more or less secure.

Puertos Gigabit Ethernet para WAN y LAN del ASUS RT-AX53U

Its other great asset with respect to Wi-Fi is that it is capable of offering higher connection speeds and that it gives great value to continue using Ethernet ports on your router. We have already talked about 10Gbps Ethernet ports, which is easily achieved with the right equipment. On the other hand, with Wi-Fi networks, due to interferences with nearby networks, it costs more to increase speed, although little by little it is achieving it, for example, the maximum speed that we have achieved in this article via WiFi 6 with 160MHz width channel is around 1.4Gbps real, however, via network cable with 10G networks we have achieved a real speed of 9.8Gbps, which will allow us to squeeze the ultra-fast connections of the operators with XGS-PON.

Finally, using the Ethernet ports on your router makes you have less ping than Wi-Fi. This could be especially appreciated for multiplayer online games and tasks that require a quick response.