Why Is My PS5 Stuck at 60 Hz on a 120 Hz TV?

Updated on November 19, 2026

PlayStation 5 beside a TV and an HDMI soundbar

If your PS5 shows 60 Hz on a 120 Hz TV, check the TV’s signal while a game with a 120 FPS mode is running. If it still shows 60 Hz, connect the PS5 directly to a TV input that supports 4K at 120 Hz using the console’s original HDMI cable. This gives you a starting point for checking the game, cable, or soundbar one at a time.

Check the game and the PS5 settings first

  1. On your PS5, go to Settings → Screen and Video → Video Output. Set 120 Hz Output and Resolution to Automatic. Sony’s video output guide explains where to check the current signal and which modes the connected HDMI device says it supports.
  2. Start a game with a 120 FPS option and enable it in the game. For example, Epic’s Fortnite instructions tell PS5 players to select Performance Mode under Settings → Saved Data and Game/App Settings → Game Presets first. Then open Fortnite’s Video settings and turn on 120 FPS Mode.
  3. Check the TV’s signal information or the game overlay while the game is running. Look for the incoming resolution and refresh rate. The PS5 home screen may show 60 Hz even when the same setup switches to 120 Hz during play.

Check the manual for your exact TV model and HDMI input number. Some TVs support 4K at 120 Hz on only certain inputs, and you may need to enable the faster mode for that port. Sony’s HDMI port chart shows how this varies by model, including sets that call the setting Enhanced format.

Test each HDMI cable before adding the soundbar

Use the same TV input, game, and video settings for all three checks. After reconnecting, go back into the game and record what the TV sees. If you use a receiver or HDMI switch, you can test it the same way.

  1. Start with a direct connection. Connect the PS5 to the TV with the cable that came with the console. If this setup reaches 120 Hz, you have a working reference.
  2. Try the second cable directly. If a soundbar or receiver uses a second HDMI cable, swap that cable into the same PS5-to-TV connection. This tests both cables separately with the same TV port.
  3. Put the soundbar back in the video path. If the soundbar has an HDMI input for a console, connect the PS5 to that input and the soundbar’s HDMI output to the same TV port. Use the two cables you just checked.

For example, if both direct runs show 2160p at 120 Hz and the soundbar run shows 2160p at 60 Hz, check the soundbar’s video passthrough settings and specs. You’ve shown that the TV and PS5 can already run 4K at 120 Hz together.

What you seeWhat to check next
60 Hz on the home screen and 120 Hz in the gameThe TV is receiving a 120 Hz signal during play. Use the in-game reading as your reference.
60 Hz in the game with the original cable connected directlyCheck the game’s 120 FPS setting, the PS5’s 120 Hz Output setting, and the TV’s input number and enhanced HDMI mode.
120 Hz with the original cable, but 60 Hz or dropouts with the second cableCheck the second cable. If replacing it, choose a certified Ultra High Speed HDMI cable.
Both cables work directly at 4K and 120 Hz, but the soundbar setup falls to 60 HzCheck the soundbar’s HDMI input, output, and passthrough specs. Or route the PS5 video directly to the TV and send audio back separately.
120 Hz at 1440p or 1080p, but 60 Hz at 4KThe setup can handle 120 Hz at a lower resolution. Check whether the exact TV input and every device in the video path also support 4K at 120 Hz.

Keep the soundbar and send PS5 video directly to the TV

Plug the PS5 into a 4K 120 Hz input on the TV. Connect the TV’s HDMI ARC or eARC port to the matching port on the soundbar, then select the external audio output on the TV. The TV can then send audio to the soundbar while the PS5 sends video directly to the TV. Our guide to choosing the right TV HDMI port explains which labels to look for.

HDMI eARC sends audio back from the TV, so check video passthrough as a separate spec. For example, Samsung lists the Q700D with eARC and 4K passthrough at 60 Hz, while the Q990D can pass 4K at up to 120 Hz. Check your soundbar’s full model number and confirm which TV port you’ll use for the console before changing your wiring.

Check the TV’s port chart if its ARC or eARC port is also its only 4K 120 Hz input. You need one connection for the console’s video and another for audio to the soundbar. If there’s no second suitable input, a soundbar with confirmed 4K 120 Hz passthrough is one option. Optical audio is another option if both devices support it, but it offers fewer audio formats.

If the picture disappears even with the console connected directly, try a known working cable and TV input first. If you still can’t see the PS5 menus, the PS5 Safe Mode video guide explains how to restore a displayable resolution.

FAQs

Does the PS5 home screen have to show 120 Hz?

No. Check the TV’s incoming signal with a compatible game running in its 120 FPS mode. Some TVs show the refresh rate in their signal information or game overlay.

Do 120 Hz and 120 FPS mean the same thing?

120 Hz describes how often the TV can refresh the image. FPS is how many frames the game renders per second. A 120 Hz signal confirms the display mode, and the game’s frame rate can still vary.

Do I need a new HDMI cable for 4K at 120 Hz?

Start with the HDMI cable that came with the PS5. If it works directly, reuse it. For a replacement or a second cable in a passthrough setup, look for the Ultra High Speed HDMI certification label on the package.

Can I use 120 Hz if my TV can’t do it at 4K?

Possibly. Some displays accept 120 Hz at 1080p or 1440p. If yours supports 1440p, use Test 1440p Output under the PS5’s video settings to see which modes it accepts over the current connection.