You may be thinking of buying a WiFi repeater for your home and get the wireless connection of your router to reach every corner. However, not all of them have the same characteristics so that the coverage of the Internet connection improves as much as we would like.
It is for this very reason that a series of aspects must be taken into account before launching to buy this particular device. In this article we will explain the most important details that you should not leave out when buying a WiFi repeater.
with network ports
One of the points that we must look at is that the device has a network port. And it is that, in this way, it will not only help us to expand the WiFi connection at home, but by having an Ethernet port , it will allow us to connect other devices by cable if we need it, as could be the case of a TV, computer, console, etc.
In this way, we will not have to move the router in the event that we need to connect a particular device by cable to gain stability when browsing or higher download and upload speeds . Even if it comes with a Gigabit port, even better, since if, for example, we have a rate of 600 Mbps, we can take full advantage of it, since it allows us a speed of up to 1 Gbps. Basically, because if it is a Fast Ethernet port, the speed will be limited to 100 Mbps.
Simultaneous dual or triple band
Another important aspect is to know if it is a simultaneous triple band , that is, it broadcasts in three bands, one 2.4 GHz and two 5 GHz, or if it is a simultaneous dual band , it broadcasts in the 2.4 GHz bands and 5GHz. Or, in the worst case, that they only broadcast in one frequency band.
In any case, those simultaneous triple band Wi-Fi repeaters have a dedicated frequency band exclusively for the interconnection of devices, so we will have the best possible performance in terms of connection. In the case of dual band, they use shared frequency bands, so we would lose half the bandwidth if we use the same frequency. Therefore, in these situations, it is best that we opt for a simultaneous triple band, although they will be more expensive.
Wi-Fi standard supported
And finally, the WiFi standard that the repeater supports comes into play. In addition to the fact that the router that we have at home will also be important. A clear example is the fact that, if we do not have a router with WiFi 6, it will be useless to have a repeater that supports this standard.
Therefore, we must be clear at all times that the ideal if this is your case is that you change your router and then buy the repeater compatible with this standard. In addition, to improve the WiFi 6 connection through the wireless repeater, we must take into account two technologies: OFDMA and MU-MIMO . By having one of these two technologies, we will improve the real performance of wireless connections.
