We can connect devices in both the 5 GHz and 2.4 GHz bands . Each of them can be interesting depending on the circumstances. In this article we are going to talk about the case of televisions . We are going to explain when we should connect them to each of the two bands and what benefits we can obtain. The goal is to make the connection work as well as possible.
What band to connect the TV to
Television is one of the many devices that we can connect via Wi-Fi. As usually happens, we will have the possibility of connecting to the network at one of the two available bands. And this can generate doubts. We want the connection to be as good as possible and to be able to play streaming series and movies without cuts.
We have to say that there is no one band better than another, but it will depend on the circumstances. If you have the television next to the router, the ideal is that you connect to the 5 GHz band. It is the one that will offer the highest speed, so you will be able to play 4K content without major problems.
However, this band is more sensitive to distance and possible obstacles. If we are connected too far from the router, it would be best to connect the TV to the 2.4 GHz band. It is true that the speed is not going to be the best, but we will avoid continuous cuts. In addition, the 5 GHz band loses a lot of speed as soon as we move far enough from the access point.
Therefore, the ideal we can say is to connect the television to the 5 GHz band if circumstances allow it. This is how we will achieve maximum speed to be able to view content in the highest quality. However, if you do not have the router nearby and the coverage of this band is very limited, then it would be better to connect it to the 2.4 GHz band.
Ethernet cable, alternative to connect the TV
Beyond connecting television via Wi-Fi , whether in one band or another, there is an alternative that is the Ethernet cable. This will provide more stability and, at the same time, speed. The distance at which we connect the device will not matter so much and we will be able to watch series and movies in perfect quality without cuts. You can also connect the computer to the TV.
But here also some factors have to be taken into account. It is important to use a good cable. To have the best speed, a Gigabit Ethernet cable is essential so you are not limited to the maximum 100 Mbps that a Fast Ethernet cable offers.
If you want to connect cable television and you are far from the router or you do not have an installation done, one option you can do is to place PLC devices . These devices are connected to each other through the power line. You put one of them next to the router and the other near the TV. You just connect an Ethernet cable between the TV and the PLC and you can achieve good speed and stability.
In short, we can connect the television in the 5 GHz and 2.4 GHz bands. Each of them can be interesting depending on the circumstances, so you will have to see each case and what suits you best.