Updated on November 22, 2026

This guide is also available in German and in French.
HDMI ARC can carry Dolby Atmos from a compatible TV app when the app sends it in Dolby Digital Plus and both the TV and soundbar support it. Use HDMI eARC if you’re sending Apple TV 4 K’s Dolby Atmos signal or lossless Dolby TrueHD Atmos from a Blu-ray player through the TV. A dedicated HDMI input on a compatible soundbar gives those players another route.
So the Netflix app on your TV can deliver Atmos while the same Netflix title on your Apple TV 4K plays in 5.1. The two devices can send the soundtrack to your soundbar in different formats.
When ARC is enough for Dolby Atmos
ARC stands for Audio Return Channel. It sends the TV’s audio back to your soundbar through HDMI. The newer enhanced Audio Return Channel, or eARC makes room for higher-bandwidth formats such as Dolby TrueHD and multichannel PCM. Dolby Atmos can travel in several formats, so the source and the TV’s ability to pass the format through both matter.
| What you’re watching | How the source can send Atmos | What works on the TV-to-soundbar link |
|---|---|---|
| A streaming app built into the TV | Dolby Digital Plus with Atmos. This is a compressed stream. | ARC can work when the TV can send it and the soundbar can decode it. Sonos lists Dolby Digital Plus Atmos over ARC for its compatible soundbars. |
| An Apple TV 4K app | Dolby MAT carries multichannel audio with Atmos information, as Sonos’s format guide explains. | Use eARC and check that the TV can pass Dolby MAT to the soundbar. |
| A Blu-ray with a Dolby TrueHD Atmos track | Dolby TrueHD with Atmos. This is a lossless stream. | Use eARC with TrueHD passthrough on the TV and TrueHD Atmos support on the soundbar. |
| A TV connected by an optical cable | Optical normally carries stereo or compatible compressed 5.1. | Use HDMI to carry Atmos from the TV to the soundbar. |
Connect the right HDMI ports
- Find the labeled ports. Run HDMI from your TV’s ARC or eARC port to the soundbar’s HDMI OUT (TV ARC/eARC) or HDMI TO TV port. The soundbar can receive TV audio through that port even though it’s labeled OUT.
- Choose the soundbar in the TV’s sound menu. Select the HDMI receiver or external audio system. Enable the TV’s HDMI control setting if the manual calls for it, especially for ARC. Samsung names that feature Anynet+.
- With two eARC-capable devices, enable eARC and check the digital output format. For example, Samsung’s Atmos setup guide recommends HDMI e-ARC Mode → Auto and Digital Output Audio Format → Auto or Pass-Through. Menu names and available settings vary by model.
If you have no audio at all, our soundbar troubleshooting guide walks through the connection and input checks to do before testing Atmos.
Try the same title on the TV and on Apple TV
- Pick a title and audio language you know have Atmos. Netflix’s Atmos requirements include a compatible device, a plan that supports Ultra HD and streaming quality set to High or Auto. Atmos availability can vary by episode and audio language.
- Play the title in the TV’s own app, then check the incoming audio format on your soundbar’s display or in its app. Sonos owners can check the Now Playing screen or About My System. A title badge shows what the app offers. The soundbar’s format display shows what arrived. Check for Dolby Atmos specifically, since Dolby Digital Plus also carries ordinary surround sound.
- Open the same streaming app on your Apple TV 4K and play the same title in the same audio language. Under Settings → Video and Audio → Audio Format, check that Dolby Atmos is enabled if the option appears. Leave Change Format off when testing Atmos. Apple’s soundbar setup instructions confirm that this Atmos output exceeds ARC’s capacity.
If your receiver always displays Atmos on Apple TV 4K, check Continuous Audio in the same menu. Apple’s audio settings guide says some older receivers can show Atmos with that option on while the original soundtrack plays. For a clearer test on those devices, try it with Continuous Audio off and compare a confirmed Atmos track with a standard 5.1 track.
| What the soundbar reports | What to check next |
|---|---|
| Atmos from the built-in app, but 5.1 from Apple TV over ARC | Your ARC link can carry the TV app’s Atmos stream. Try an eARC connection that passes Dolby MAT or connect Apple TV directly to the soundbar. |
| Stereo PCM or regular 5.1 from both sources | Check the app, plan and audio track, then verify the TV’s digital audio output and the soundbar’s supported formats. |
| Atmos with the player plugged into the bar, but 5.1 through the TV | Check the TV’s eARC mode and its ability to pass your player’s particular Atmos format. Direct HDMI can keep the player’s audio working while you check the TV’s settings. |
How to get Atmos with an ARC-only TV
Look for a separate port labeled HDMI IN in your soundbar’s manual or on the bar itself. If the bar supports your player’s Atmos format, connect the Apple TV or Blu-ray player to that input. Connect the soundbar’s HDMI OUT to the TV. The soundbar handles the player’s audio and passes the picture to the TV. For a Blu-ray, select the Atmos track in the disc menu and choose Bitstream or the player’s equivalent. If the player has a secondary audio mixing setting, turn it off for this test.
Before choosing this wiring, verify the soundbar’s video passthrough for the features you use, such as Dolby Vision or 4K at 120 Hz. Our guide to a PS5 stuck at 60 Hz shows how to check whether a soundbar limits the video signal. If you’re shopping, our guide to choosing a soundbar explains which inputs and other specs to compare.
Frequently asked questions
Can a soundbar with eARC work on a TV with ARC?
Yes, if the soundbar also supports ARC. The connection can carry Dolby Digital Plus Atmos if both devices support that format over ARC.
Will eARC make streaming Atmos sound better?
If the same Dolby Digital Plus Atmos track already reaches your soundbar over ARC, eARC sends that same compressed track. eARC is useful when your setup needs to carry a higher-bandwidth format or the current connection is falling back to 5.1 or stereo.
Can I get Dolby Atmos through the optical port?
For a TV connected to a soundbar, use HDMI to get Atmos. Optical is useful when your equipment supports stereo or ordinary compressed surround over that connection.
Do I need to buy a new HDMI cable for eARC?
Start with the cable supplied or recommended by your TV or soundbar maker. HDMI’s eARC guidance says certified Ultra High Speed HDMI cables are designed for eARC, and some older HDMI cables with Ethernet may also work. If your current cable reliably carries the format you need, keep using it.
Can I get Atmos from a Blu-ray player without an eARC TV?
Yes, if you connect the player to a compatible soundbar’s separate HDMI IN and the bar can decode the disc’s Atmos format. Sony‘s Dolby Atmos hookup guide shows how to route the audio to the soundbar and send the picture onward to the TV.