Experiencing constant flickering with a smart bulb can be frustrating to the point where you might consider turning it off completely. However, instead of giving up in desperation, there are several solutions worth trying before reaching that conclusion. It’s important not to jump to the assumption that your smart light is defective right away; there might be a connection or switch problem causing the issue. We’re here to provide you with some guidance!
Flickering in smart bulbs is not an uncommon occurrence, often attributed to glitches in their settings. Fortunately, with the manufacturer’s manual on hand, these issues can usually be resolved. Nonetheless, it’s worth noting that there could be other factors affecting the optimal functioning of your smart bulb.
It is pairing
During the initial setup of a smart bulb, it’s essential to pair it with the lighting system in your home or office. Depending on the bulb, it may require pairing with Wi-Fi or your phone’s Bluetooth through a dedicated app. It’s typical for the bulb to flash continuously during this process until it successfully configures itself and establishes a stable connection.
If you find yourself repeatedly turning the switch on and off, it’s normal for the bulb to disconnect from Wi-Fi and require reconnection. In such cases, using the official app can assist in locating and reconnecting the bulb to the previously connected network.
Connection error
As mentioned before, it is normal for the repeated flashing to occur while the smart bulb searches for a suitable connection. However, if this behavior persists, it could indicate a weak Wi-Fi signal or an incorrect password being entered.
If the bulb was previously connected and suddenly starts flashing, it could be due to a disruption in the Wi-Fi network. This doesn’t necessarily mean that your internet service provider is experiencing an outage; it can also occur when there are power surges or fluctuations in your home. The most effective solution in such cases would be to ensure that everything is functioning properly with your router and review the settings in the app to ensure they are correctly configured.
Does not contact well with the switch
A potential cause for erratic behavior in smart bulbs could be a compatibility issue with the switch. Traditional light bulb switches may not work seamlessly with smart bulbs, despite their similar appearance. The way they function differs significantly. With a regular switch and a non-smart bulb, flipping the switch simply turns the light on or off. However, with smart bulbs, the intensity of light can be adjusted based on the configuration.
It’s important to note that dimmer switches are not well-suited for use with smart bulbs. Connecting a smart bulb to a dimmer switch can result in flickering or continuous flashing. In such cases, the dimmer switch should be kept in the “on” position to avoid problems, and the bulb can be controlled solely through the app, turning it on or off as needed.
Additionally, the sockets themselves can pose problems if they don’t receive sufficient power or if they are old. Over-tightening the bulb can damage the part of the socket that makes contact with the bulb. It’s worth inspecting the socket to determine if it contributes to the issue. If no obvious problems are found with the socket, it could be related to the wiring of the plug. If none of these issues seem to be the cause, trying another bulb in the lamp can help identify if the problem lies with the bulb itself.
It needs a reboot
If none of the previously mentioned solutions have resolved the issue, it might be necessary to perform a manual reset on the smart bulb. Resetting the bulb will restore it to its original factory settings, meaning that all the customized settings will be lost. However, after the reset, you will be able to reconfigure the bulb with your desired settings.
The process for resetting the bulb can vary depending on the brand and model you have, so it is advisable to consult the manual or instructions provided by the manufacturer to troubleshoot this problem. Just like with any other connectivity issue, a thorough reset often proves effective in resolving the issue.