How to connect the PS2 via HDMI: methods and adapters

How to connect the PS2 via HDMI: methods and adapters

One of the things that cannot be missing in your house if you have a good collection of classic consoles is a television that has analog connections . The retro consoles that marked our youth so much used component connections, those white, red and yellow connectors that no matter how hard you look for them, they are not on the most modern televisions. If you want to connect a console like the PlayStation 2 to a Smart TV, you probably have a few questions. Can anything be done to connect the PS2 to a modern TV via HDMI? Well, let’s try to answer that question.

Can the PS2 be connected to a TV via HDMI?

PS2 SLim.

Modern TVs get along pretty badly with analog technology. VGA and component connections are completely banned from the new Smart TVs. It is true that there was a small transition period in which some televisions were sold that had the best of both worlds, but those models are no longer commercialized.

If you’ve just taken your old PlayStation 2 out of the box it was stored in and want to play one of its legendary games again, you’ll be wondering what you have to do to connect it to your modern television. And well, yes, the connection can be made, although the thing has a bit of science.

Method 1: PS2 2 HDMI

ps2 2 hdmi.

In order for you to be able to use your PlayStation 2 on a modern television, it is necessary to convert the analog video signal to a digital image before it reaches the television. There are several ways to do it, but the simplest thing you will find is a ‘PS2 2 HDMI’ type adapter.

These adapters have quite affordable prices. They are placed directly above the video output of the console. At the other end of the dongle, the device has an HDMI slot and a 3.5mm headphone jack.

The converters have prices that rarely reach 30 euros , so they are a fairly cheap solution to solve this problem that occurs with modern televisions. These that we show you below are the best known:

Link for PS2 2 HDMI

It is worth less than 20 euros , and it is one of the best-selling models in the entire market. It can offer 480p, 480i and 576i resolution output. A one-meter HDMI cable is included in the pack.

This model is quite famous, but it can only work in one mode. If you want to be able to switch between RGB and YPbPr, we will show you an alternative in the next section.

Prozor PS2 to HDMI RGB + YPbPr Adapter

It is a slightly more expensive model than the previous one, but it guarantees a conversion of the PlayStation 2 signal to a digital television without loss.

The most interesting thing about this dongle is that it has two different modes . We will connect the device to the video output of the PS2 and then we will put the HDMI cable from the adapter to the television. The Prozor adapter has a button that allows you to change the video mode. YPbPr mode gives the best picture quality, but it can also be set to RGB mode .

The quality of materials of this adapter is quite good, and it allows to dissipate heat well, so we will not have cuts during transmission. Regarding resolutions , it supports 480i, 480p and 576i .

Option 2: RCA to HDMI Adapter

adaptador rca ps2.jpg

The method that we have seen in the first section is not bad at all, but it has a small drawback. In this post we are only talking about the PlayStation 2, but… am I really going to have to buy a separate adapter for each analog console I have at home? Not necessarily. With an RCA to HDMI adapter , you’ll be able to use both the PlayStation 2 and any other console you have lying around.

The operation of this type of adapters is also very simple. On the input side they have the usual component connectors. And at the other end is an HDMI output . With this you will not only be able to connect the PlayStation 2, but you will also be able to rediscover consoles such as the GameCube, the Wii or even the original PlayStation.

As usual in these cases, the quality of the dongle will greatly influence your user experience. The cheapest models can get hot and cause some other problem if we play very long games during summer days. Here are a few of these devices:

QGECEN RCA to HDMI

This model has a fairly affordable price and is the best seller on Amazon. It supports output with a maximum resolution of 1080p at 60 Hz , so you will have better bandwidth than other proposals.

As you can see from Amazon’s comments, it’s a fairly reliable adapter, and users consider that it does its job quite well both with PlayStation 2 and with other more recent consoles that still used this type of connection (such as the PS3), which can take advantage of Full HD resolution.

EASYCEL Component to HDMI Converter

adaptador easycel.jpg

If you are looking for an even more complete product, this EASYCEL brand adapter is one of the most interesting you will find to connect old consoles to your modern television, as well as any other type of retro device.

The maximum output resolution of this adapter is Full HD at 50 or 60 Hz . It is slightly more expensive than the model that we have presented at the beginning of this section, but it has very good ratings and it is a more complete product both for its number of connections and for the level of materials that have been used to manufacture the device.