Having a good Internet connection is very important so that web pages load quickly, streaming videos are not interrupted or we can upload files to the cloud without problems. However, this is not always possible. For this reason, in this article we are going to explain how to check if the router signal is adequate or if we should take measures to improve it. This will help us optimize resources and get the speed to be the best it can be.
How to know if the router signal is adequate
If a weak signal reaches our computer, mobile or any connected device, that will mean that we will have problems connecting to the Internet. We may even not have access to the network or continuous outages. In that case we would have to take measures, such as installing repeaters, PLC devices, Mesh systems or anything that helps us improve the connection. Therefore, it is essential to know if the router signal is correct.
do speed test
The first and most obvious thing is to do a speed test . This will allow us to know what is coming both down and up. We will be able to see if it corresponds more or less to what we have contracted (for Wi-Fi there will always be some loss) or if it is far from what it should be.
This can also give us clues to the quality of the connection by looking at the ping . The lower it is, the better. This is very important to play online or make video calls. In addition, we can always switch between the 2.4 and 5 GHz bands and thus see how the signal that reaches us is in each case.
If we see that the speed is very limited or we have a very high ping, it is an indicator that the signal from the router is not good and we must take action. For example, change the location of the router or use devices that amplify the signal so that it reaches the areas where we are going to connect better.
windows terminal
You can also see precisely how the signal from the router is simply by accessing the Windows Terminal. You will be able to see the power that reaches you and check if it is adequate or not for what you need. The larger, the better for maximum speed and reduced risk of clipping.
In this case you have to go to Start, enter the Windows Terminal and execute the command netsh wlan show interfaces . There it will show you the different wireless networks and the signal that reaches you. You also see the name, the Wi-Fi band, the type of encryption, etc. But what interests you is the Signal section.
As you can see in the image, a 99% signal appears. This is so since the router is very close. As soon as we move away a little that percentage will go down. If you see that it is too low, it means that the signal that reaches you is very limited and you may have problems navigating.
external programs
Another option that you can take into account is to use external programs to analyze the signal of the wireless network . This will also give you clues as to whether it is adequate or you should do something to improve it and get the speed to be correct in order to make the most of the connection.
There are different alternatives, but two of the most popular are Acrylic WiFi and WiFi Analyzer. They show you very interesting data related to the Internet signal and this can help you learn more about how to improve quality and avoid annoying cuts.
In short, these are some options you have to know if the signal from the router is good and to be able to improve it. There are different methods to improve the quality of coverage, such as using repeaters or PLC devices.