It’s rare that we decide not to put a case on our phones. More than anything because this way we will avoid that, in the face of a silly fall, it ends up breaking, or at least, we will achieve less damage. However, over the months and years, these accessories gradually lose their original appearance. And not only that, but they become yellowish or pick up too much dirt. For this reason, we are going to tell you some tricks so that the mobile cover looks almost like new.
The other drawback that we must always take into account is that there are many types of covers that we can carry with our terminal. Therefore, depending on the materials you have, it will be better to use one method or another, because sometimes a few wrong steps or products can leave this accessory worse than it was before. Cleaning the mobile phone case is not only something that improves the aesthetics of our smartphone, but it also makes it healthier, since many bacteria tend to accumulate in them with daily use.
never do this
Before moving on to the most important part of the topic, it is clear that we will not always be able to use the same cleaning products and tricks for all these accessories. More than anything, because your materials will be different. For this reason, we must pay attention to what we do and what we do not have to use at any time for smartphone cases.
For example, something that we should not do is use hot water , under any circumstances. Basically, because we could damage the material of this, so, in these cases, it will be better to use cold water as long as we recommend doing so. Another of the products with which we must be careful is bleach or another that is just as strong, as it can damage the casing of our terminal forever.
What material do you want to clean?
It is something that we must take into account when choosing one or another material to be able to remove dirt from the mobile phone case. Depending on the materials with which it is made, it will be more appropriate to clean it with one product or another. Although we already warned you, that for all of them there is an element that is going to be essential in this process, we are talking about microfiber cloths.
This is the microfiber cloth, an increasingly fashionable and efficient material for cleaning our covers with all possible guarantees, and above all with the care required by the materials that most of these accessories are made of. You can buy some packs in which many of them come with a perfect size.
Of sylicon
These are the most common cases, and the most loved by mobile users and, therefore, it is very likely that yours is also one of them. Well, to clean this type of accessory, in addition to the microfiber cloth, we can use a toothbrush with which we can remove all the dirt from the surface without damaging the cover itself. Along with the cloth and brush, it is best to use dishwashing soap or similar .
In any case, we must be very careful, because they are not as durable and resistant as plastic ones, so we must not apply any strong chemical product such as bleach .
Wet the brush with hot soapy water and apply it to the entire surface of the case, especially those areas where there is more dirt. The action of the soap with the toothbrush will remove all the most visible dirt.
Once we clean the most difficult areas with the brush, pass the cloth moistened with hot water together with the soap and rub it over all its areas to remove the rest of the most superficial dirt. Now let it dry before placing it back on the mobile. However, if in your case it has excessive dirt, we also recommend you try a solution with baking soda, with which we can remove all the stains and without damaging it at any time.
the plastic ones
This type of material has lagged behind the other materials, but that does not mean that you cannot still opt for them. Basically because they are still one of the most durable options to protect smartphones. The plastic casings have as an extra that they can be easily cleaned, if we compare them with the rest of the types that we have brought you today.
There are several products that we can use to remove dirt or bacteria from these accessories: bleach, hand soap or water. In addition, we can use sponges, toothbrushes and rags. Everything will depend on what we have most at hand in our homes.
In the event that you use bleach, we recommend putting on some gloves before you start cleaning it. Then, take a container, add water and a small spoonful of soap or bleach and submerge the cover for a few minutes in the mixture that we just made. Then take it out and scrub it with the brush or sponge. Finally, dry it and let it finish drying naturally before placing it back on the terminal.
The rubber casings
This type of cover is quite similar to the silicone ones, and they usually have finishes similar to those of the rubber of a tire. This type of material usually traps not only dirt, but also dust. To clean these cases, we also need to mix water and dishwashing soap . With a toothbrush soaked in this mixture, we rub over the dirtiest areas until we can remove the stains.
Then, for a comprehensive cleaning of the most superficial dirt, we must pass the microfiber cloth all over the cover to remove all the remaining moisture. Finally, if there is any area of this that still shows some dirt, we can mix baking soda with a little water to spread it everywhere. With this mixture the rest of the dirt should disappear.
Of wood
They are not very numerous, but there are covers of this type, with wood finishes that, after all, behave like any object made of this material.
As you know, wood needs care, and when it comes to cleaning it even more so, since it is necessary to be very careful with what we apply to it.
It must be clear that we must not apply corrosive materials on the surface of the cover itself, but in any case we must always apply it to the microfiber cloth, in a small amount, and then carefully rub the surface of the wood.
If the residue is more resistant than normal, we can apply a little vinegar to the cloth to pass it very carefully over the wooden cover, in such a way that with circular movements the dirt disappears. Finally, dry it in such a way with a microfiber cloth or paper to remove what we have just applied to this accessory. In this way, we will be able to leave it totally shiny, even reaching the level of the first day.
leather covers
In the market we have those that imitate the appearance of leather, and others that are really made of this noble material. In this case, when we talk about leather, we must also avoid products that are too corrosive, since we risk discoloring the fabric or damaging it. Therefore, on this occasion, it is best to use hand soap .
We will apply this with a damp microfiber cloth , in such a way that we gently apply the soap over the entire surface of the cover. The normal thing is that in a leather casing the dirt appears localized in the areas where we grab it, showing the darkest area. Therefore apply the hand soap solution with the cloth gently until it recovers its original color.
Of course, it is very important to do it with a moderate amount of water , because we run the risk of damaging the skin with excess water, so we must pay special attention to this aspect and patiently clean this type of material.