We all want our Internet connection to work as well as possible, with good speed and without interruptions. However, this does not always happen and sometimes it is due to mistakes that we make as users. That means that with some small changes or avoiding mistakes we can achieve a significant improvement in the Wi-Fi network. In this article we are going to talk about it. We are going to explain what you should avoid doing so that your wireless network starts to malfunction.
What mistakes to avoid to have good Wi-Fi
Having a good Wi-Fi connection today is essential. We have more and more connected devices, especially due to home automation and the Internet of Things. That means that we need good coverage, speed and capacity to connect more and more devices without interruptions. Therefore, it is essential not to make mistakes.
Use any repeater
It is common for us to install a wireless repeater to improve the home Wi-Fi signal. It is a simple device to use and can help improve coverage. But of course, not all are the same. In fact, some can become a problem and even make the connection start to go worse, with cuts and poor speed.
Therefore, avoid using any Wi-Fi repeater. Always inform yourself to acquire the best device. In addition, there is not only the option of the repeater, but you can use a Wi-Fi Mesh system or PLC devices that will also be useful for coverage to reach other places in the house without interference and cuts.
Put the router anywhere
It is essential to position the router well. However, in many cases we place it anywhere . Sometimes this happens for convenience, so that it does not get in the way, but other times it is because we have no choice but to install it. Whatever the reason, try to locate the router in a suitable place so that it can better distribute the signal and you will not have problems.
For example, it is a mistake to put the router near other electronic devices. This can affect the Wi-Fi network, especially when you use devices that use the 2.4 GHz band and connect to that band. It is also important that you do not put it in an area covered by boxes, furniture or anything else that could block the signal.
Ideally, it should be in an elevated location, away from possible interference and, if possible, in a central place in the house. In this way you can better distribute the signal without coverage problems.
Not choosing the right band
Today most devices allow us to connect to the 5 GHz band and also to 2.4 GHz. However, there are differences between one and the other. The former is best for maximum speed, but is more sensitive to distance. On the other hand, the second one is slower, but more stable and less sensitive to distance.
Choosing well which one you are going to use is going to be essential. That can be key to having a good Wi-Fi connection and that there are no problems with speed, coverage or possible interference that can damage connectivity.
