What to do if your trackpad fails

Although it is not usually the usual thing, the trackpad of your Mac can fail for various reasons. Some of them can be solved quite simply, however there are times when you will have no choice but to go to a specialist. If you want to know how to fix your trackpad in a simple way, in this post we bring you some solutions.

Sometimes, the trackpad of some MacBooks fail, either due to misuse, the passage of time, or a manufacturing defect. Sometimes it doesn’t respond, and then works normally again. In others it stays partially stuck, moves on its own or one of its sides does not work.

What to do if your trackpad fails

Possible faults

When it doesn’t work or doesn’t respond immediately, the first thing to do is calibrate it. To do this you have to go to System Preferences, Trackpad and modify it there, since it could be configured in such a way that it requires a very fast displacement or double click.

If it continues to give you problems, it may be because it has accumulated traces of dirt. As these are components that physically move and are not completely closed, dirt and human grease often enter through slots such as the trackpad, screen or Home button on iPhones and iPads . In the case of the trackpad, it can be useful to clean it by trying to put air between the holes so that the dirt moves, or depending on the model, even open the lid if the user is a little more advanced.

trackpad mac

If the problem persists despite cleaning it, it may be the fault of the battery. When it swells, it pushes the trackpad, as it is placed just below and both components are separated by only half a millimeter. In this case it is recommended to remove it or replace it with a new one. It must be remembered that since the end of 2008, in most laptops the battery is not easily accessible to users, so in these cases it is recommended to do it in a specialized site.

Depending on the model, the trackpad is held in place with four or six screws. If you press too hard repeatedly you can run the risk of damaging the one located right in the middle, which is the one that allows the component to click. In this case it must be calibrated or replaced with another, it is not necessary to change the entire component.

If the trackpad problem is sliding, it may be due to the operating system or connection to the electronics of the device. There are times when the user thinks that they have a fault with the trackpad because it moves on its own or does not respond, and it is really the operating system . In these cases, another system that is included in an external hard drive or partition can be connected to the laptop. This way you can check if this component is still failing.

If none of this has worked for you, it is best to make an appointment with Apple so that a specialist can check that everything is fine and can give you a much more professional solution. If you don’t have any Apple Store near your home, you can always go to a SAT.