There are many errors that can arise when using our systems to access files remotely, for example. In this article we are going to talk about the error that the RCP server is not available . Let’s see what we can do in Windows 10 to try to solve it. We will give a series of recommendations that we can put into practice in a simple way.
How to fix the error when the RCP server is not available
When the error “RCP server is not available” appears, it will cause access to certain files to be restricted . However, we can take into account some tips to be able to solve it quickly. It is a failure that, in general, is easily solved, although some actions are necessary.
This problem occurs when a Windows 10 computer cannot communicate with another device within the same network. The reason can be varied, such as a badly configured firewall or some third-party software that is causing problems.
Restart the RCP server
One of the main steps that we must take is to restart the RCP server . In this way, the Windows system will re-establish the connections and will be able to recover the processes that may be failing for any reason.
To do this we have to go to Start, look for Administrative Tools and open it. Later we have to enter Services. Once we are here we have to look for the DCOM Server Process Initiator and double click.
It should be noted that the startup type is set to automatic and the running service status. We must give Start and restart the computer.
Clean computer boot
As we said before, one of the causes of the RCP server is not available error is when there is some type of software generating conflict . We can clean the startup of the computer to ensure that there are no third-party programs that may be causing problems.
For this we have to go to Start, we write System Configuration and later a new window will open. There we have to go to the Services tab and check the Hide all Microsoft services box. Later we verify the services that appear in the list and we give to disable all .
Once this is done we go back to Start and this time we open the Task Manager. We have to go to the Home tab and then we will disable each of the processes that appear to us. We restart the equipment.
Check that the network is working properly
It may happen that when browsing Wi-Fi we have network problems . Maybe it is not connected or the signal is weak and there are cuts. This could also happen if we surf via LAN cable. In both cases we must check that the network is really working well.
This is a simple and basic process. We simply have to check that there is nothing wrongly configured related to the IP or DNS address that we use. Verify that no conflict is being generated that causes the error that the RCP server is not available.
Update or reinstall network drivers
Another point to keep in mind is to update the network card or reinstall it again. Sometimes there could be failures of this type related to an error with the drivers. It can arise if we have recently updated the equipment, for example.
To do this we have to go to Start, we write Device Manager, we go to the Network Adapters section, we look for the one that corresponds and we click with the second mouse button to click Update. We can also disable it and re-enable it.
Configure the firewall correctly
It could also be a problem with the firewall. This type of tool is very useful to protect our network, although it can also cause problems when browsing or starting certain services when there is some bad configuration.
Therefore, another tip is to configure the firewall . See if there is something wrong since it is blocking traffic. We can simply try to pause it momentarily or also see if it is blocking some type of service that it should not.
Restore the system
In case all this that we have explained has not had any effect, another point to take into account is to restore the system to a previous state. It is possible that we have made some bad configuration, installed something that has somehow changed our system.
In short, these are some steps that we can carry out when the error that the RCP server is not available appears. These are some simple actions that we can take and find out if this solves the problem.
