QNAP has launched its first Wi-Fi card with the Wi-Fi 6 standard, the new QNAP QXP-W6-AX200 is a PCIe card and is compatible with all its NAS servers and also with its QGD switch to provide them with wireless connectivity. The manufacturer’s QTS operating system has a very complete network application, and from here we can configure this card in access point mode, in this way, we can turn our NAS server into a true high-performance wireless router. A very important aspect is that this new card is compatible for both PC and NAS, therefore, we could also use it without any problem on our computer.
QNAP QXP-W6-AX200 Card Main Features
The most important feature is that this card incorporates the Intel AX200 , therefore, we will have all the wireless technologies of the Wi-Fi 6 standard, in addition to being backward compatible with 802.11 a / b / g / n / ac. This Wi-Fi card is capable of achieving a speed of up to 574Mbps in the 2.4GHz band , thanks to its two external antennas in MU-MIMO 2T2R configuration, at 40MHz channel width, 1024QAM and Wi-Fi 6 that incorporates. In the 5GHz band we can achieve a speed of up to 2,400Mbps , thanks to its two external antennas in MU-MIMO 2T2R configuration, at the 160MHz channel width that this wireless card supports, 1024QAM and the Wi-Fi 6 that it incorporates. This Wi-Fi card has all the Wi-FI 6 technologies, such as MU-MIMO in both bands, OFDMA, Beamforming and the 160MHz channel width in 5GHz, a fundamental characteristic to achieve high wireless speeds. Lastly, it also supports color BBS, a technology to avoid interference with other wireless networks.
The QXP-W6-AX200 card incorporates a PCIe Gen 2 x1 port , the design of the antenna offers a magnetic base and a certain inclination to have the best possible signal strength, thanks to this antenna base, if we install this PCIe card and we have the NAS or our PC boxed in, we can provide and achieve better performance thanks to this base of external antennas that we have available. QNAP’s goal with the launch of this Wi-Fi card is to provide its NAS servers with the best connectivity, both through Ethernet, as it has done with its latest NAS with NBASE-T Multigigabit technology , as well as Wi -Fi 6 to achieve high transfer rates. Thanks to this ultra-fast connectivity, we will be able to make backup copies via Wi-Fi without always relying on cable connectivity, logically we will need to use the QNAP network tool to put it in AP mode, or else, have a router with Wi-Fi 6 AX3000 class to get the most out of this wireless card.
This Wi-Fi card is also compatible with PC, regardless of whether you use the Windows or Linux operating system, since we have the necessary drivers for both operating systems at our disposal, when we install this Wi-Fi card in a QNAP NAS server we do not It is necessary to install any driver, since it is installed by default, the chipset is from the Intel AX200, so you will not have any problem with the wireless drivers.
This QXP-W6-AX200 model also offers Bluetooth 5.0 connectivity, since the Intel AX200 card itself incorporates it. Thanks to the incorporation of Bluetooth 5.0, we will improve speed and range compared to previous versions of this technology.
We recommend you access the official website of the QNAP QXP-W6-AX200 where you will find more information about this model. Are you interested in upgrading your laptop’s Wi-Fi card? In this article we have published a complete tutorial on how to change your laptop’s WiFi card and upgrade it to Wi-Fi 6 for less than 30 euros .
