One of the advantages of mechanical keyboards is that we can remove the key caps to wash them apart. Which not only allows us to easily clean it of dirt, for which we recommend a portable handheld vacuum cleaner. However, many times the problem comes when we have already placed all the keys and it is that suddenly we see how the keys are released, making us unable to write well and with ease. Do you have any loose keys on your mechanical keyboard? Well, we are going to tell you how to solve the problem.
Those of you who have gotten used to using mechanical keyboards will know that they have a number of advantages over membrane keyboards. One of them is its easy cleaning and maintenance. Sometimes it happens when we are typing that we inadvertently take one or more of the keycaps with our fingers. That is extremely annoying, as we have to stop and reposition them all the time. And things get worse if we need to write fast. However, it is a problem that has a solution.
How to avoid the problem of loose key?
The reason why this happens is due to the fact that they are not placed well enough on the mechanical switch of each one. For this reason, it is important that when placing them again we press with two fingers on the cap once we have placed it. However, sometimes it happens that even after doing there is always a loose key. What you have to do first is simple, put the keyboard upside down, shake it a little and you will see how the ones that are not well placed will fall, once this is done, place them again and repeat the operation until none do.
If after this it continues to happen to you, then you should look for other methods, do not worry, we will explain them to you below.
Consider renewing the key caps for better ones
If you see that the loose key is always the same, then you should think about the possibility that your keycap could be defective. It is always good to have a complete set to replace the keys in case they are erased or there are some defective ones. Which can happen, in addition, you can take advantage to further customize your keyboard and give it a unique look. Of course, you may find that the brand of your keyboard uses proprietary switches and does not officially sell spare parts, although with a little luck and looking through AliExpress or Amazon you may find something.
Avoid the use of modeling glue
Don’t even think about using plastic modeling glue , as this will melt the plastic and it may end up sticking to the mechanical switch below. We’ve heard of people who have done this and killed the keyboard in the process. In addition, the problem is that later you will not be able to disassemble said key to clean it.
Cheapest solution if you have a loose key
The best thing you can do is take one of the adhesive tapes to paint walls to carry out the following procedure:
- Cut very thin strips, 1 mm thick.
- Put these half-sunken strips into the gap at the bottom of the loose key cap with the glue side facing the switch. To prevent the sweat from your hands from damaging the adhesive tape tail, we recommend using tweezers.
- Snap the key into position, this will give an extra hook that will prevent the key from coming loose.
The advantage of this method is that you can then safely use the Keypuller to pull the key out along with the rest and clean the keyboard as normal. Of course, you will have to repeat the process again for each time you clean the keyboard.
Make improvements to your mechanical keyboard
If everything we have proposed does not satisfy you, then you can consider making some improvements to your mechanical keyboard in order to increase its performance and support. In any case, if none of this works, we recommend you change your keyboard completely and buy a new one.