How to Improve the Speed of PLC Devices

Maintaining good Internet speed is essential for users. Today, most users connect through wireless networks. Wi-Fi has become a basic thing for our day to day. However, keep in mind that the signal does not always arrive well. Coverage may not be optimal and there may be problems. To solve them we can make use of other devices. An example is the PLC. In this article we are going to talk about it. We will explain how to make PLCs work faster with some tips.

Tips for PLCs to work well

plc devices

Among all the devices that we can use to improve Wi-Fi coverage, PLCs are widely used. As we know, they work through the electrical line and allow the connection to be taken to other places in the home. So we can connect without so many problems from other corners of our home.

Distance is a very important factor for wireless networks . Inevitably this affects Internet speed, connection quality and stability. It can cause problems that we cannot even connect from certain devices that may have a more limited wireless antenna.

To avoid this we can make use of some devices to amplify or take the signal to other areas. That’s where PLCs come into play. But of course, as can happen with other devices, failures also appear on occasions that make the speed or quality of the signal not the most adequate. We are going to give some advice.

Distance matters a lot

One factor that certainly matters a lot is distance . It is true that PLCs are precisely designed to take the Internet to other places and thus reduce the impact that the distance between the router and the devices may cause. However, it must be borne in mind that the further we take these devices, the more signal loss there will be.

Theoretically, PLC devices can function correctly up to 200 meters. It is not necessary to calculate that distance in a straight line, since the wiring can travel more meters depending on the route they take. From 200 meters we can experience a signal loss that will be more or less pronounced according to other factors.

Therefore, if we want the speed and quality of the signal to be the best possible, the ideal is that we do not put them too far.

Connect them directly to the wall

This is very important. If we connect the PLCs to a power strip, for example, we may experience problems. This strip may not allow the connection to flow properly and cause loss of signal. This needs to be applied on both devices.

The advice here is to connect the PLCs directly to the wall . Thus they will be directly connected to the power outlet without intermediaries that can cause problems.

Avoid connecting other devices nearby

Another point to keep in mind is that connecting other devices to the current can generate noise . It mainly occurs with mobile chargers and other similar devices. This can slow down the Internet and cause problems affecting the quality of the connection.

Therefore we recommend avoiding connecting other devices near where we plug the PLCs. This way we will have more guarantees to avoid speed problems.

Having a guarantee PLC

Of course, whenever we are going to acquire PLC devices, we must take into account that they are guarantees . It is vital that we make sure that what we are buying is really going to help us gain speed and stability.

We leave you an article where we show the best PLCs .

Opt for cable when possible

Finally, one more tip we want to give is to opt for cable when possible. Many PLCs allow you to connect an Ethernet cable in addition to the wireless connection. As long as we connect by cable the stability of the connection will be greater and therefore the speed will also improve.