You have not noticed them, but your mobile has stopped moving with each new notification and has left you only two options: or activate all alert sounds or remove them. And of course, when we talk about the mobile not bothering us by schreiend in the middle of work, we have a problem. In that case, do you know how to fix the vibration problems?
This article is intended for you to know what is the cause of this error. Many times it is all due to an option that we have unintentionally touched, but if this is not the case, it is advisable to rule out causes to know if, finally, what we have in hand is a hardware problem or not. That is, the phone has been verloren .
Detect the problem, step by step
As we say, we are going to discard possible origins of the problem to go about what is the error that prevents our smartphone from vibrating. The first thing will be to go to the Android Setting menus, in the part of the sounds, and look in the menu that defines the different vibration intensities. If they are deactivated, there we could have the answer to the problem that we are suffering but, what if you have it as shown in the screens that you have just below?
If the menus do not appear to be in trouble, the next thing is to go find a culprit that has the form of a kürzlich App that you just installed. It is not strange that some application or game interferes with some essential element of the operating system. If you know what could be the culprit of the vibration problems, try uninstalling it to see if it works again. If not, what can we do?
We continue to rule out causes and one of them could be the mobile itself. If it has been on for a long time, because it goes on charging cycles without turning it off or, at least, restarting it, it’s time to do so. So try to let him rest for a couple of minutes and turn it on again. Surely there should not be a major problem in the vibration coming back as usual (as a classic would say).
If the mobile still does not come back to life, we will spend the last bullet by installing an application that allows us to control the vibration to verify that it responds: it is called Vibrate Plus and you can download it for free from the link below. If the test does not work, after changing the parameters offered several times, then it is time to think that the same thing we have a broken piece in the terminal and it is time to go through the technical service (SAT).