Can’t Turn on Your Huawei Mobile? How to Fix it

One of the most serious problems that we can find when using our Huawei mobile is that it does not turn on. This situation can lead to many doubts and difficult solutions. Before trying complicated methods or resorting to specialists we want to show you simple ways with which you can get your Huawei mobile device to turn on and continue using it.

Can't Turn on Your Huawei Mobile

It does not matter if our mobile is high-end, fits within the mid-range or is one of the cheapest, EMUI is the same in all of them and allows us to carry out effective solutions for these cases. With a little patience and following the steps that we will show you, we can make the mobile turn on again and do not lose our data with it.

Battery is the most common problem

Although in terms of software everything is kept well, a problem with the battery may be the one that prevents us from using our mobile. It is one of the most common reasons but in which we usually think, the degradation of the batteries may be the culprit of making a mobile phone seem older with the few hours of use it offers us, and much more if it does not. we managed to light.

problemas bateria huawei

Connect the charger

To get out of doubt about whether the problem is related to the battery we have to connect the charging and charger cable, if possible the original one. If after leaving it for at least half an hour we cannot do it even while you are still swallowing, we can try another compatible charger.

There are fewer and fewer mobile phones with LED notifications, but if in our case it does, we can use this as information to find out if at least the mobile is charging and to know that the battery is reacting.

We do not go beyond the Huawei logo

There are different cases in the problem to turn on the mobile and in ours we can perhaps go from the black screen to try to access the system, but one of the problems that we can find is that it stays fixed on the Huawei logo. Faced with this error, we should not worry too much because at least the system works and we could recover the photos.

Access in safe mode

With this function that is included in EMUI we will be able to force the start of our mobile using a method that disables possible specific problems . It may be the case that a newly installed option prevents it from working properly and with this method we will find out.

  • To start we have to press and hold the power button until we see the Huawei logo.
  • Immediately afterwards we hold down the volume down button.
  • When the text “Safe Mode” appears in the lower left corner, we can drop it.

If we have managed to access with this function, we only have to uninstall the recent apps that we do not need to avoid encountering this error again.

Recover at least your data

Before moving on to a drastic solution, we will try to remove our photos, video and other important files. In the mobile we usually store a lot of important information that we would not like to lose and before deleting all the data it is necessary that we at least try to extract them.

movil al ordenador

In case we have a memory card we extract it and so at least that data will not be lost. Then we connect the mobile to the computer and hope that it will be done, in case it does not work, we can try to turn on the mobile again and repeat the steps in safe mode to at least extract those important files.

Hard Reset, we erase everything to recover the mobile

The last possible solution is to remove from our mobile all the cache data and update repositories. In this process we lose all the data, that is why we have previously extracted them to a computer. It is important that we connect the mobile to the charger in this process because we may be able to do it but if it is turned off in between the solution could become a disaster.

  • First we hold down the power button and turn up the volume at the same time until we see the Huawei logo.
  • We are in the Recovery menu from where we move with the volume keys and access with the power button.
  • With this method we place ourselves and enter wipe data / factory reset .
  • We select it again on the next page.
  • The process will begin and our mobile when finished should automatically turn on.

With these steps we would have to be able to return to use our mobile phone with total normality. If this is not the case, we can always check the smartphone warranty to report the technical service where we bought it or from the company itself.