Updated on November 21, 2026

This guide is also available in German and in French.
A USB-C dock can charge your laptop even when the monitor shows No signal. Charging confirms that power is getting through. The image also needs a video connection from the laptop, through the dock and into the selected input on the monitor.
Start with one monitor and keep the laptop lid open. Check the input on the monitor, then look up the exact USB-C port you plugged the dock into. Change one thing at a time so you can tell which step brings the picture back.
Why a USB-C dock can charge without sending video
Many docks rely on DisplayPort Alt Mode to receive video from the laptop over USB-C. The dock can then send that video to its HDMI or DisplayPort output. Other docks use a Thunderbolt connection or USB graphics such as DisplayLink, so check the requirements for your model and the output you’re using.
Two USB-C ports can look identical and support different features. Dell’s dock guide shows what DisplayPort and Thunderbolt markings look like. A symbol can help you find the port. Use the laptop’s manual to confirm exactly which port supports the video connection your dock needs.
Five checks to find where the signal stops
1. Confirm the monitor input and its video cable
Turn on the monitor and select the input that matches the socket you used. For example, if you’re using HDMI 2, select HDMI 2 in the monitor’s menu. If you’re using DisplayPort and the monitor has both an input and an output, use DP In.
If you have a known-working video source handy, plug the same HDMI or DisplayPort cable into it and keep the same monitor input. A picture confirms that the monitor and that cable work at the tested setting. If the screen stays blank, try a known-good video cable before troubleshooting the dock.
2. Connect the dock to a laptop port that supports video
Look up the exact laptop model and check the list of ports. For a dock that uses DP Alt Mode, look for DisplayPort over USB-C or DisplayPort Alt Mode. For a Thunderbolt or USB4 dock, check the manufacturer’s compatibility list for your laptop and dock. As one example, HP’s USB-C Dock G5 specifications list USB Power Delivery and DisplayPort Alt Mode as host requirements.
If Windows shows “Display connection might be limited”, check the laptop port and the cable against the dock’s requirements. On a Mac, our guide to Mac ports can help you identify the connector before you check your model’s specifications.
3. Check the USB-C cable between the laptop and the dock
Plug the cable into the dock’s computer or Host port if the dock has one. Connect the dock’s own power supply if the model requires it. If the dock has a detachable host cable, test with the one that came with it or a replacement specified by the dock maker.
A cable sold for charging can deliver enough power while lacking the video or data capability your dock needs. Check that the cable supports the dock’s connection type, such as USB-C video or Thunderbolt. Keep the laptop port and monitor cable the same when testing a replacement host cable.
4. Check whether the laptop sees the monitor
- On Windows 11, press Windows + P and choose Extend. If the monitor is missing, go to Settings > System > Display > Multiple displays > Detect. You can use our Windows multi-monitor setup guide to arrange the screens once both appear.
- On a Mac, go to System Settings > Displays and hold Option to show Detect Displays. If the monitor still stays dark, Apple’s external display guide recommends testing it directly with the Mac where possible.
If the laptop lists the monitor but you see a blank screen, try a supported lower setting, such as 1080p at 60 Hz if it’s available. If the picture returns, check the dock’s supported combinations before raising the resolution or refresh rate or adding another monitor.
5. Check the dock on a second compatible laptop
If you can borrow a laptop that supports the dock, try the same dock, power supply, cables and monitor input. If the picture works on the second laptop, look at the first laptop’s port, display settings and required drivers. If the same test fails on both, check the dock maker’s support page for model-specific steps and firmware. For a DisplayLink dock, use the software the dock maker lists for your operating system.
A port-label example you can follow
Suppose the dock is connected by HDMI to HDMI 2 on the monitor. That cable and input work when you plug into a known-working source. The laptop manual lists two USB-C ports. The left port supports USB data and charging, while the right port also supports DisplayPort Alt Mode.
The laptop charges while the dock is plugged into the left port. Keeping the same monitor input and both cables, move the dock’s USB-C cable to the right port. If the image appears, you’ve isolated the problem to the port you started with. If it stays blank, keep using the video-capable port and test the dock’s original host cable next.
What your test results mean
| Test result | What it tells you | What to do next |
|---|---|---|
| The monitor works on the same input and video cable with another source. | The monitor input and its cable work at that test setting. | Look upstream at the dock, its host cable and the laptop port. |
| The screen works when you move the dock cable to a documented video-capable laptop port. | The choice of laptop port was the issue. | Use the working port for the dock. |
| The same setup works with the dock’s original or specified host cable. | The other USB-C cable was a likely cause. | Use the working cable or get a replacement that meets the dock’s specs. |
| One monitor works at 1080p at 60 Hz, but a higher setting or a second screen goes blank. | The requested display mode or combination may exceed what the setup can handle. | Check the laptop and dock display limits for those ports and settings. |
| The dock gives no picture with two compatible laptops, a supported display mode and proven cables. | The dock’s power supply, firmware or video output is a stronger suspect. | Try another supported output if available. Contact the dock maker with the results. |
Frequently asked questions
Why does the dock charge the laptop and run a keyboard but show no picture?
The dock can supply power and pass ordinary USB data while the video connection is missing. Check which USB-C port carries video on your laptop and what type of connection the dock needs.
Can any USB-C charging cable connect my laptop to a dock?
Use the original host cable or one that meets the dock’s video and data requirements. A wattage rating tells you about charging capacity. Look for the connection type specified by the dock maker as well.
Do I need a DisplayLink driver for my dock?
Install one if your dock’s manual calls for it. DisplayLink uses USB data for video, so its software requirements differ from those of a dock that uses the laptop’s native DisplayPort signal. Some docks use different technologies for different outputs, so check the port you’re using.
Why does one monitor work but the second one stays blank?
Check the number of displays, resolutions and refresh rates your laptop and dock support together. Test each monitor on its own first, then check the dock’s display table for the exact ports you want to use together.