PLC devices are very useful to improve the Internet connection when the coverage does not reach some areas of the house. They are an alternative to having a Wi-Fi repeater, for example. However, they are delicate, sensitive devices and that we must place correctly to make the most of them. In this article we are going to show 5 common errors when placing PLCs. In this way you will avoid errors and you will be able to improve the connection.
Where is an error to put PLC
The fact of placing the PLCs in the wrong place can mean that they do not work well, that the speed that reaches you is weak or even have continuous cuts. For this reason, it is essential to choose very well where we are going to locate them and not make mistakes, with the aim that the coverage arrives as well as possible.
On a power strip
A common mistake is to put the PLCs on a power strip. This is not a good idea, since it will lose effectiveness there. You are going to have interference and it is more frequent that there are problems to achieve a good speed and quality of the connection. It is true that it may seem like a good option to avoid having to spend a plug, but it is not the best.
Ideally, you should place each PLC in a separate socket, without a power strip or anything else connected. In this way you will make the connection work better, without the dreaded cuts appearing.
Close to other devices
Another common mistake is to place PLCs close to other devices. For example near the television, computer or any other electrical device. This can also cause interference and there are problems for the connection to work properly, without cuts and with good speed.
Again, it’s best to be isolated and not have anything around that might affect the PLCs. Do not put it near any device that may generate interference. This will affect whether we connect via Wi-Fi or via cable.
Next to a wall or wall
This, although it is common sense, is another reason why they work badly and many users make this mistake. Logically, if we place them near a wall, a wall or any obstacle, they will cause the signal to not go correctly and not reach the devices that we want to connect wirelessly.
It is a good idea to put it in a location from which it can distribute the signal well . If possible, as isolated from any wall and in a central place in the house, so that the signal reaches the rest of the rooms better.
Where you don’t need connection
Another logical error is to place them where we are not really going to take advantage of it. Ideally, you should think carefully about where in the house you need to improve the connection and focus on it. In this way you can boost the signal in that area, where you are going to connect from a computer, mobile phone, television or any device.
It is important that you put it in an area where you are really going to take advantage of it. Think about which devices you are going to connect to the network and in what way, since you can do it both by cable and by Wi-Fi. In case you connect wirelessly, you should not place the PLC too far away. You can always connect multiple PLCs.
Too close to the router
One more mistake that we make on many occasions when installing PLC devices is placing it too close to the router . Why is it a mistake? It does not mean that it will work badly if, for example, we put it in the next room. But of course, it is not really going to bring a substantial improvement to the connection.
The interesting thing about PLCs is being able to connect them far from the router, in areas where the coverage does not reach or is very weak. In this way we can boost the signal thanks to the electrical wiring and take the connection to other places. Therefore, it is not a good idea to put it too close to the router since we would miss out on the function of these devices.
